TURF RAKE service
ADJUSTING THE CONVEYOR CHAIN TENSION
There should be a maximum of 1.5 inches back and forth. Tightening is required if the chain is looser.
Choose Your surf rake model
Play Video about adjusting the conveyor chain video thumbnail
REQUIRED TOOLS
1 1/8″ (29mm) Wrench
1 1/8″ (29mm) Socket Wrench
FREQUENCY
Check every couple of weeks
ADJUSTING THE CONVEYOR CHAIN TENSION
#1 Open the side door, turning the latch counterclockwise to reveal the Conveyor.
#2 Check Conveyor tension by pulling the chain back and forth.
#3 There should be a maximum of 1.5 inches back and forth – tightening is required if the chain is looser.
#4 To tighten, loosen the jam nut. Allow enough room for the take-up bolt to be tightened.
#5 Tighten the take-up bolt with a socket wrench.
#6 Check the belt tension – tighten more if necessary.
#7 Repeat the process on the other side of the Surf Rake.
