SURF RAKe service
ADJUSTING THE DUMP CHAIN
Play Video about adjusting the dump chains video thumbnail
REQUIRED TOOLS
1 1/8″ (29mm) Wrench
Adjustable Wrench
FREQUENCY
Check regularly and adjust as needed.
QUESTIONS?
Contact a Barber team member at:
(800) 355-8318 or
hbarber@hbarber.com
ADJUSTING THE DUMP CHAIN
#1 Your Dump Chains need adjustment if they are loose.
#2 They also need adjustment if the bucket does not rest on the bucket stop.
#3 To tighten the Dump Chains, start by loosening the jam-nut.
#4 Tighten the turnbuckle.
#5 Make sure the bucket block fits against the angle.
#6 Repeat on the other side until both sides are tight.
#7 Re-fasten the jam nut.
