H. Barber HomeLoginContactSite Map
H. Barber & Sons Surf Rake
Beach & Sand Cleaners
Surf Rake
Models & Options
How It works
Applications
Specifications
Beach Cleaners Contractor Package
Sand Man

Stone Pickers
Litter Collection Equipment
EspaƱol
About Us
Barber in the News
Product Videos
Email this Site to a Friend

SURF RAKE Specifications

Barber Logo Beach cleaners Barber Surf Rake Beach Rake
MODELS:
600HD 400HD 400
DIMENSIONS:
H: 7'6" L: 13'1" W: 7'8"
H: 7'6" L: 11'9" W: 7'6"
H: 4'5" L: 9'10" W: 7'6"
WEIGHT:
Approximately 3800 lbs
Approximately 2700 lbs
Approximately 1900 lbs
CLEANING WIDTH:
7 feet (6 feet deep cleaning)
6 feet (4 feet deep cleaning)
6 feet (4 feet deep cleaning)
CLEANING DEPTH:
Adjustable to 6"
Adjustable to 6"
Adjustable to 6"
OPERATING SPEEDS:
1.0 to 15.0 miles per hour
1.0 to 15.0 miles per hour
1.0 to 15.0 miles per hour
DEBRIS REMOVED:
Broken glass, plastic, syringes, cigarette butts, pop-tops, straws, cans, tar balls, stones 3/8" to 6" in diameter, sea grass, seaweed, fish, small pieces of wood.
PERFORMANCE:
Cleans 2 to 8 acres per hour
Cleans 1 to 5 acres per hour
Cleans 1 to 4 acres per hour
HOPPER:
2 cubic yards (3800 lbs cap)
(Optional: 2.8 cubic yards)
1 cubic yard (2400 lbs cap)
(Optional: 1.8 cubic yards)
¾ cubic yard (2000 lbs cap)
DUMP HEIGHT:
8 feet / 9 Feet Clearance
8 feet
GROUND
TIRES:
36 x 13.5 x 15 high flotation design
31 x 13.5 x 15 high flotation design
31 x 13.5 x 15 high flotation design
CONVEYOR:
Of bar flight type, covered with continuous 6' wide belt, with stainless steel spring tines mounted on it.
Of bar flight type, covered with continuous 4' wide belt, with stainless steel spring tines mounted on it.
Of bar flight type, covered with continuous 4' wide belt, with stainless steel spring tines mounted on it.
HYDRAULIC DRIVE:
Completely sealed and protected by the full flow filter. Large capacity spline mounted pump, hydraulic motor, flow control, and built-in overflow protection.
Completely sealed and protected by the full flow filter. Large capacity spline mounted pump, hydraulic motor, flow control, and built-in overflow protection.
Completely sealed andprotected by full flow filter. Large capacity spline mounted pump, hydraulic motor, flow control, and built-in overflow protection.
HYDRAULIC FLOW:
12 gallons per minute
12 gallons per minute
12 gallons per minute
HYDRAULIC CAP:
15 gallons
11 gallons
11 gallons
CYLINDERS:
Lift 3½ x18" single acting
Trip 2' x 5' single acting
Lift 3½ x18" single acting
Trip 2' x 5' single acting
Trip 1½" x 10 single acting
PAINT:
Dupont IMRON® Polyurethane enamel
Dupont IMRON® Polyurethane enamel
Dupont IMRON® Polyurethane enamel
TRACTOR
60 PTO horsepower 4-wheel drive agricultural type tractor with 30" rear wheels.
35 PTO horsepower 4-wheel drive agricultural type tractor with 28" rear wheels.
30 PTO horsepower 4-wheel drive agricultural type tractor with 28" rear wheels.
OTHER TRACTOR
REQUIREMENTS:
540 RPM rear PTO, 3-point hitch and depending on model and options, up to 3 remote hydraulic valves with raise, hold, and float positions. Larger or smaller tractors may be used depending on beach conditions.

The manufacturer reserves the right to change the specifications without notice and without incurring obligation. The information contained herein is from data available at the time of publishing.

Surf Rake Brochure
Adobe Acrobat Reader Required

Surf Rake Brochure

Surf Rake Metric Literature
Adobe Acrobat Reader Required

Surf Rake Literature